|
|
Savannah horse stall specifications
| The Savannah horse stall is a three-component stall consisting of the door and two wings. This horse stall has an open front with high and beautifully radiused wings. The Savannah horse stall door, with its low, open style, has an upper grill section 3" O.C. and, for added safety, a tighter lower grill section 2" O.C. To complement the design features, horizontal wood sections separate the upper and lower grills and are tucked into double rolled channel (so there are no wood edges to chew).
|
| To view a larger version, or print out the schematic, please click above. Note: Adobe Acrobat Reader must be installed on your computer. Don't have Acrobat Reader? Click the Acrobat logo at bottom of page for instructions on how to download your free copy.
|
| The stall wings are welded 3" on center and have a gorgeous double radiused top. They are securely attached to the door posts with rivet nuts. The bottom of the wings are open and can be filled with optional exotic hardwood or high density polyethylene lumber, which slides into the double rolled channel - a far superior and much stronger steel than standard "c" channel. Present in both wings are horizontal wood panels which mimic the stall door design, giving the stall more strength and more beauty. Laser cut steel gussets, cut into beautiful scallops, sandwich the wood in place and prevent horses from eating the wood. The left wing comes standard with a grain feed opening.
The heavy steel stall door posts, between the centered door and each wing, are bolted to the floor and have adjustable hinges to which the stall door is attached. Topping the stall door posts are solid brass flat finials with hidden attachments. Optional brass ball finials are available to add that extra icing to the cake.
The door latch is a unique finger latch which can be opened from either inside or outside of the stall - a great design and safety feature. The stainless steel latch is mortised into the steel door frame with a solid cast brass striker and stainless steel adjustable striker plate.
While most companies offer just a handful of finish choices, we give you 192 choices of powder coating colors to choose from. And we don't cut corners on our hardware - we use the industry's highest quality hardware available.
|
Technical specifications
- Hinged centered door
- Horizontal wood panels top and bottom
- Wings w/double 56 degree 7" center line radius using 1-1/2" pipe (1-7/8" O.D.)
- Mortised stainless steel finger latches w/brass striker
- Stainless steel adjustable radiused latch striker plate
- Laser cut latch plates and gussets
- Horizontal gusseted panels for inset lumber
- Solid brass flat finials
- Finial attachment hidden with welded ¼" nut and all-thread internal screw
- Adjustable clevis door hinges
- Bronze hinge bushings
- Double rolled 11 gauge channel for lumber .90 I.D. 1-5/8"x1-5/8" O.D.
- Attachment height 90" (high side)
- Radius grills to 86" (high side)
- Latch side and hinge side posts 4" schedule 10 pipe 58" high (low side)
- 4-bolt pattern latch and hinge side attachment to floor
- Slots on wings for post attachment
- Upper grills ½" schedule 40 pipe (7/8" O.D.) 3" O.C.
- Lower grill ½" schedule 40 pipe (7/8" O.D.) 2" O.C.
- Powder coating - 192 color choices
- Hinged right (standing from outside) unless otherwise requested
|
Options
- Partition posts with 10" base plate and hardware
- 1" x 5" kiln-dried, tongue and groove exotic hardwood
- 1" x 6" high-density polyethylene tongue and groove lumber
- Brass ball finials
|
|
|
Horse Stalls