Home
    Horse Stalls
      Horse Stalls
    Grilled Partitions
    Exterior Dutch Doors
    Exterior Shutters
    Rubber Flooring
      Equine Rubber Pavers
    Equine Rubber Tiles
    Stall Flooring
      Stall Flooring
    Paddock Surfacing
    Horse Fencing
      High Density Polyethylene
    Quick Rail
    Horse Arenas
      Covered Arenas
    Enclosed Arenas
    Barns
    Barn Accessories
      Automatic Insect Control
    Automatic Horse Waterers
    Horse Feeders
    Hold Open Door Magnets
    Rotating Wash Wands
    Infrared Heaters
    Barn and Arena Lights
    Saddle Racks
    Saddle Blanket Racks
    Bridle Racks
    Cross Tie Brackets
    Building Design
    Installation Tips
    Free Estimates
    Testimonials
    About Us
    Contact Us
    Links
 

Rubicon horse stall specifications

One of the features of this perfect stall is its open design, which both complements your barn aesthetically and allows for the socialization that horses thrive on. Because horses are able to see their buddies, they're less likely to act up in undesirable ways, such as cribbing, pacing, and kicking.

The stall door, although low enough for your horses to see their friends, is designed at a respectable 58" - high enough to discourage any jumping. This is another thoughtful and innovative design feature of the Rubicon. Horses tend to react suddenly - the height of this stall front deters any attempts at escape.


Schematic of the Rubicon horse stall
To view a larger version, or print out the schematic, please click above. Note: Adobe Acrobat Reader must be installed on your computer. Don't have Acrobat Reader? Click the Acrobat logo at bottom of page for instructions on how to download your free copy.

A centered door adds another measure of safety to the Rubicon stall. Because of the inherent strength in our centered door, no connecting bar between the wings is necessary, thus eliminating any potential for stumbling, a very real occurence with other stalls. In addition, the adjustable hinges, with their never-need-greasing bronze bushings to hold the hinge pin in place, make a perfect fit possible. Add the optional hold-open door magnet to hold your stall door completely open, flat against the stall front.

A tightly spaced upper section assures you that no part of your horse will be entangled in the grill, which is welded from incredibly strong steel.

The stainless steel and brass finger latches eliminate the protruding parts, standard on most latches, that easily snag clothes or horseflesh. Because you can access the latch from inside or outside the stall, you and your horse will never be trapped inside the stall under dangerous conditions, such as a fire. And the completely hidden latch discourages the brightest equine Houdini. We thought of you and your horse when we designed the perfect stall.

Finish off your stall with your choice of 192 powder coating colors. An environmentally responsible choice, powder coating is far superior to an ordinary liquid paint finish, and is resistant to chipping, scratching, fading, and wearing. All the hardware you need to put your stall together is included - and this hardware is the best of the best. Because that's what our clients want for their horses.




Technical specifications

  • Centered hinged door set up for wood
  • Wings w/double 56 degree 7" center line radius using 1-1/2" pipe (1-7/8" O.D.)
  • Mortised stainless steel finger latches with brass striker
  • Stainless steel adjustable radiused latch striker plate
  • Laser cut latch plate
  • Solid brass flat finials
  • Finial attachment hidden with welded ¼" nut and All-thread internal screw
  • Adjustable clevis door hinges
  • Bronze hinge bushings
  • Double rolled 11 gauge channel for lumber .90 I.D. 1-5/8"x1-5/8" O.D.
  • Attachment height 90" (high side)
  • Radius grills to 86" (high side)
  • Latch side and hinge side posts 4" schedule 10 pipe 58" high (low side)
  • 4-bolt pattern latch and hinge side attachment to floor
  • Slots on wings for post attachment
  • Upper grills ½" schedule 40 pipe (7/8" O.D.) 3" O.C.
  • Powder coated choice of 192 colors
  • Hinged right (standing from outside) unless otherwise requested

Options

  • Partition posts with 10" base plate and hardware
  • 1" x 5" kiln-dried, tongue and groove exotic hardwood
  • 1" x 6" tongue and groove high-density polyethylene lumber
Please click here to download installation tips. Note: Adobe Acrobat Reader must be installed on your computer. Don't have Acrobat Reader? Click the Acrobat logo below for instructions on how to download your free copy.

Download Adobe Reader



800-888-9921
2566 Business Parkway, Unit A  Minden, NV  89423
Local: 775-267-5550  Fax: 775-267-6857
info@equinesystems.com