|
|
Monterey specifications
| The Monterey horse stall is perfect for those that prefer a sliding stall door. A fancier version of our Cheyenne, this stall is often used in barns where a greater degree of security for the horses is provided via the high stall door. The grilled tops and wood bottoms assure your horses get the privacy they need without sacrificing the view.
|
| To view a larger version, or print out the schematic, please click above. Note: Adobe Acrobat Reader must be installed on your computer. Don't have Acrobat Reader? Click the Acrobat logo at bottom of page.
|
| Standard with the Monterey is the ultimate in sliding door hardware – a double set of 4-wheeled trolleys that are over-sized for an extra degree of strength, yet quiet and smooth - simply incomparable in quality.
The latching system is a grill plunger latch that can be used with one hand and shut easily, so important when you're leading a horse. The grill work is ½" schedule 40 pipe 3" O.C. giving strong upper grill strength. The steel channel for the lumber is made exclusively for Innovative Equine Systems and is rolled for a clean, soft appearance and smooth function so that dirt and water do not accumulate in the steel below.
Optional round partition posts are available with the Monterey – where applicable – and set off any show barn that utilizes a clear span building for stalls.
We offer the highest quality hardware available, which is included in the price, as well as your choice of 192 powder coating colors for a durable and long lasting finish.
|
Technical specifications
- Centered sliding door (sliding left, unless otherwise requested)
- Right and left wing sections
- Door and wings have full grill tops, double rolled channel set up for wood on bottom, and top and bottom horizontal panels
- Grain feed opening on left wing
- Door has plunger latch with a spring-loaded grill section
- Door posts with hinge attachments and paired stainless striker plates
- Double rolled 11-gauge channel - 7/8" I.D.; 1 5/8" x 1 5/8" O.D.
- Hidden Delrin receiver
- Industrial quality sliding hardware (trucks and trolleys)
- Full length track welded to angle iron header with tab attachments
- Attachment height: 90"
- Reversed channel on door bottom to hide door stays
- Delrin door stays are attached to floor
- Adjustable rubber stop attached to inside of track
- Upper grill 1/2" schedule 40 pipe (7/8" O.D.) 3" O.C.
- Zinc primer base
- Powder coating choice of 188 colors
|
Options
- Hinged feeder door
- Partition posts with 10" base plate and hardware (for clear span buildings)
- 1" x 5" kiln-dried, tongue and groove exotic hardwood
- 1" x 6" high-density polyethylene tongue and groove lumber
|
|
|
Horse Stalls